Nova10 Super
Gabaɗaya Review
Super Nova 10ƙwararre ce ta co2 Laser engraving da yankan inji.Wurin aiki shine 700 * 1000mm.Super Nova10 yana ba da Metal RF & Glass DC a cikin injin guda ɗaya.Gudun zanen Nova10 Super yana da sauri kamar injinan jerin MIRA.Hakanan yana iya tafiya 2000mm/sec, saurin haɓakawa shine 5G, yana da saurin sauri a cikin aji.
Tsarin Nova10 super yana da ƙarfi sosai, wanda ya sa ya zama mai ƙarfi.The inji sanye take da saƙar zuma da ruwa worktable kuma tare da model 5200 chiller, sa ya yiwu a shigar 100W ko ma 130W Laser tube.Z-axis yanzu ya karu zuwa 200mm, don haka zai iya dacewa da samfurori mafi girma.Tsarin taimakon iska ya sami ma'aunin matsa lamba da mai tsarawa don baiwa masu amfani zaɓi don ƙara damfara mai ƙarfi don yanke kayan kauri.Kayan gaba da baya wucewa ta ƙofar yana ba da damar yanke kayan dogayen.
Amfanin Nova10 Super
Super Strong Cikakken Rufe Jikin Inji
An gina Super NOVA10 kamar tanki.Babban tsarin ya karɓi bututun ƙarfe mai kauri, wanda ya tabbatar da ƙarfi.Gaba dayan jiki a rufe yake, tare da rufe kowace kofa da tagar, ƙarin aminci.
Dukan hanyar gani da jagorar dogo mai tsaftataccen fakitin ƙira.
Fasahar fakitin tsaftar sa hannun Aeon Laser ta ɗauki mataki na gaba a cikin tsarin juyin halitta.Ba wai kawai an rufe layin layin layi da tubalan ɗaukar hoto ba (kamar yadda a cikin samfuran da suka gabata), amma labule masu kariya a gefen hagu da dama na wurin aiki yanzu suna hana ƙwayoyin da ba a so daga tsarin motsi da kuma hanyar gani.Wadannan za su rage yawan kula da injin tare da haɓaka sakamakon sassaƙa.
Metal RF & High Power DC gilashin tube tare
Ya dace da Reci W2/W4/W6/W8 Premium CO2 Gilashin Tube, 30W/60W RF Metal Tube
Gudun dubawa 2000mm/sec, 5G Acceleration Speed.
Sabuwar ƙirar Laser mai nauyi mai nauyi na Aeon Laser wanda aka haɗa tare da injina mai saurin sauri na dijital a cikin Super Nova10.Hanzarta 5G, har zuwa 2000 mm/sec.
Sauyawa Source mara kyau
Canjawa tsakanin bututun ƙarfe na RF da bututun gilashin DC, ya faru lafiya da sauri.Software ta atomatik yana haifar da bututun Laser mai dacewa da matsayin madubi a cikin kusan rabin daƙiƙa.
Duk Cikin Zane Daya
Super Nova10 ya bambanta da Nova10, tare da ginanniyar chillers 5200, abin hurawa, da taimakon iska.
Haɗe-haɗe ta atomatik
Sabon shugaban Laser ɗin da aka ƙera yana fasalta na'ura mai haɗa kai da kai mai nauyi kuma cikakke sosai.Yi bankwana da karo da kayan kwalliya.
Gudun iska mai aiki
Yi bankwana da haɓakar zuƙowa da yawa akan kayan ku da kuma a cikin majalisar ku ta lasar ku.
Tebur mai inganci da Gaban Wucewa ta Ƙofa
Abincin dare Nova10 ya zo tare da tebur na slate tare da saƙar zuma, wanda ya dace da yankan da sassaka.Akwai ƙofa mai wucewa wacce za ta iya wucewa ta kayan aiki masu tsayi.
Tsari mai ƙarfi da Tsayayyen sama/ƙasa
Tsarin sama da ƙasa ya ɗauki bel ɗin tuƙi guda ɗaya, tare da injin stepper mai ƙarfi, wanda ke tabbatar da tebur sama da ƙasa a hankali, ba ya karkata.Ƙarfin ɗagawa ya kai 120KG.
Daidaitaccen Scrap da Tsarin Tarin Samfura
Duk ɓangarorin da aka yanke a yanzu sun faɗi cikin wurin da ya dace a ƙasa, wanda za'a iya zubar dashi cikin sauƙi don hana tarkace daga tarawa da zama haɗarin gobara.
Nova10 Super Material Aikace-aikace
| Laser Yankan | Laser Engraving |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| |
| |
| |
| |
|
*Ba za a iya yanke katako kamar mahogany ba
* CO2 Laser kawai alamar karafa ne kawai lokacin anodized ko magani.
| Super10 | |
| Wurin Aiki | 1000*700mm (39 3/8″ x 27 9/16″) |
| Girman Injin | 1500*1210*1025mm (59 1/16″ x 47 41/64″ x 40 23/64″) |
| Nauyin Inji | 1000 lb (450kg) |
| Tebur Aiki | Kwan zuma + Ruwa |
| Nau'in sanyaya | sanyaya ruwa |
| Ƙarfin Laser | 80W/100W CO2 Gilashin Tube + RF30W/60W Metal Tube |
| Wutar Wutar Lantarki Up&down | 200mm (7 7/8 ″) Daidaitacce |
| Taimakon Jirgin | 105W Gina-Aikin Ruwan Ruwa |
| Mai hurawa | Super10 330W Gina Mai Ƙarƙashin Ƙarfafawa, Super14,16 550W An Gina a cikin Ƙwararriyar Ƙarfafawa |
| Sanyi | Super10 Gina Mai Chiller Ruwa 5000, Super14,16 Gina 5200 Chiller |
| Input Voltage | 220V AC 50Hz/110V AC 60Hz |
| Gudun zane | 2000mm/s(47 1/4″/S) |
| Gudun Yankewa | 800mm/s (31 1/2 ″/S) |
| Yanke Kauri | 0-30mm (ya dogara da kayan daban-daban) |
| Matsakaicin Saurin Haɗawa | 5G |
| Laser Optical Control | 0-100% Saita ta software |
| Mafi ƙarancin Girman Zane | Mafi qarancin Girman Harafi 1.0mm x 1.0mm(Haruffa na Turanci) 2.0mm*2.0mm(Jarumin Sinanci) |
| Matsakaicin Matsakaicin Bincike | 1000DPI |
| Gano Daidaitawa | <= 0.01 |
| Matsayin Red Dot | Ee |
| Gina WIFI | Na zaɓi |
| Mayar da hankali ta atomatik | Haɗe-haɗe ta atomatik |
| Software na zane | RDWorks/LightBurn |
| Ana Tallafin Tsarin Zane | AI/PDF/SC/DXF/HPGL/PLT/RD/SCPRO2/SVG/LBRN/BMP/JPG/JPEG/PNG/GIF/TIF/TIFF/TGA/ |
| Software mai jituwa | CorelDraw/Photoshop/AutoCAD/Kowane nau'in Software na Embroidery |
