AEON NOVA10 Laser Engraver & Cutter

Takaitaccen Bayani:

Farashin NOVA10ne a kasuwanci tsaye model Laser engraving da sabon na'ura.Wurin aiki shine 1000 * 700mm. Yana iya dacewa da girman girman kayan kuma zai iya shigar da bututun Laser mafi girma don yanke kayan kauri.Zai zama ingantacciyar na'ura don kasuwancin ku kuma zai kawo muku riba tabbas.


Cikakken Bayani

BAYANIN FASAHA

Tags samfurin

Gabaɗaya Review

NOVA10ne a kasuwanci tsaye model Laser engraving da sabon na'ura.Wurin aiki shine 1000 * 700mm.Daga NOVA Series na injuna, mai zanen ya motsa idanunsa zuwa yankan.Saboda haka, na'urar engraving gudun ba haka da sauri kamar MIRA inji.Ko da yake yana iya tafiya 1000mm/sec, gudun hanzari shine 2G.Koyaya, wannan saurin ya isa ya yi fice akan sauran injunan makamancinsu a kasuwa.

Tsarin na'urar yana da ƙarfi sosai, wanda ya sa ya fi dacewa.The inji sanye take da saƙar zuma da ruwa worktable da model3000 ko 5000 chiller, sa ya yiwu a shigar 100W ko ma 130W Laser tube.Z-axis yanzu ya karu zuwa 200mm, don haka zai iya dacewa da samfurori mafi girma.Tsarin taimakon iska ya sami ma'aunin matsa lamba da mai tsarawa don baiwa masu amfani zaɓi don ƙara damfara mai ƙarfi don yanke kayan kauri.Kayan gaba da baya wucewa ta ƙofar yana ba da damar yanke kayan dogayen.

Hakanan an gina na'urar bisa ga ma'aunin Laser Class I, tare da cikakken ruɓaɓɓen jikin injin tare da kulle maɓalli akan kowace kofa da taga.Murfin ya ɗauki gilashin zafi don dalilai na hana wuta.

Overall, da NOVA10 ne mai matukar kyau kasuwanci tsaye model na Laser engraving da sabon na'ura.Zai iya dacewa da kayan girman girma kuma yana iya shigar da bututun Laser mafi girma don yanke kayan kauri.Zai zama ingantacciyar na'ura don kasuwancin ku kuma zai kawo muku riba tabbas.

Amfanin NOVA10

Tsabtace-Pack-Design

Tsaftace Fakitin Zane

Daya daga cikin manyan abokan gaba na Laser engraving da yankan inji ne kura.Hayaki da ƙazanta barbashi za su rage jinkirin na'urar Laser kuma su sa sakamakon ya yi muni.Tsaftataccen fakitin ƙirar NOVA10 yana kare layin jagorar linzamin kwamfuta daga ƙura, yana rage mitar kulawa yadda ya kamata, yana samun sakamako mafi kyau.

AEON ProSMART Software

Software na Aeon ProSmart mai sauƙin amfani ne kuma yana da cikakkun ayyukan aiki.Kuna iya saita cikakkun bayanai na fasaha kuma kuyi aiki da shi cikin sauƙi.Zai goyi bayan duk tsarin fayil kamar yadda ake amfani da shi akan kasuwa kuma yana iya jagorantar aiki a cikin CorelDraw, Mai zane da AutoCAD.Hakanan zaka iya amfani da aikin buga kai tsaye kamar firintocin CTRL + P.

Aeon-ProSmart-Software (1)
Sadarwa da yawa

Multi Sadarwa

An gina sabon NOVA10 akan tsarin sadarwa mai saurin gaske.Kuna iya haɗawa da injin ku ta Wi-Fi, kebul na USB, kebul na cibiyar sadarwar LAN, da canja wurin bayanan ku ta USB Flash disk.Machines suna da ƙwaƙwalwar ajiyar 256 MB, sauƙin amfani da allon kula da allon launi.Tare da yanayin aiki a waje lokacin da wutar lantarki ta ƙare kuma injin buɗewa zai yi aiki a kan tasha.

Multi Aiki Tebur Design

Ya dogara da kayan ku dole ne kuyi amfani da tebur masu aiki daban-daban.Sabuwar NOVA10 tana da tebur na HoneyComb, Tebur Blade azaman daidaitaccen tsari.Dole ne ta share karkashin teburin saƙar zuma.Tare da ƙirar wucewa mai sauƙi Samun damar yin amfani da babban girman abu.

*Samfuran Nova suna da dandamalin ɗaga sama/ƙasa na 20cm tare da tebur na share fage.

Multi-Ayyukan-Table-Concept
Sauri-Fiye da Wasu

Fiye da Sauri

Sabuwar NOVA10 ta tsara madaidaicin salon aiki mai inganci.Tare da injunan mataki na dijital mai sauri, Taiwan ta yi jagororin madaidaiciya, bearings Jafananci, da ƙirar saurin sauri zai kai 1200mm / na biyu saurin zane, 300 mm / na biyu yankan sauri tare da haɓakar 1.8G.Mafi kyawun zaɓi a kasuwa.

Mai Karfi, Mai Rabuwa da Jikin Zamani

Sabuwar Nova10 an tsara ta AEON Laser.An gina shi akan shekaru 10 na gwaninta, ra'ayoyin abokin ciniki.Jiki na iya raba sassa 2 don motsa shi daga kowace kofa mai girman 80cm.Fitilar LED daga na'ura mai kallon gefen hagu da dama a cikin kallo mai haske sosai.

Mai Karfi-Mai Rarraba-Jikin Zamani

Tebur mai inganci da gaba suna wucewa ta kofa

  1. A NOVA10 samu ball dunƙule lantarki sama & kasa tebur, tsayayye da kuma daidaito.Z-Axis tsawo ne 10mm, iya shige a 10mm tsawo kayayyakin.Ƙofar gaba na iya buɗewa da wuce ta cikin kayan da suka fi tsayi.

Mai da hankali mafi sauƙi

  1. NOVA10 na iya shigar da sabon fasalin Autofocus.Mayar da hankali ga laser na iya zama sauƙi.Kawai danna tare da autofocus a kan kula da panel zai sami mayar da hankali ta atomatik.Tsayin na'urar mai da hankali zai iya zama daidaitacce da hannu sosai cikin sauƙi, kuma ana iya shigar da shi kuma a maye gurbinsa cikin sauƙi, ma.

Aikace-aikace na kayan aiki

Laser Yankan Laser Engraving
  • Acrylic
  • Acrylic
  • * Itace
  • Itace
  • Fata
  • Fata
  • Filastik
  • Filastik
  • Yadudduka
  • Yadudduka
  • MDF
  • Gilashin
  • Kwali
  • Roba
  • Takarda
  • Cork
  • Korian
  • Tuba
  • Kumfa
  • Granite
  • Gilashin fiberglass
  • Marmara
  • Roba
  • Tile
 
  • Kogin Ruwa
 
  • Kashi
 
  • Melamine
 
  • Phenolic
 
  • * Aluminum
 
  • * Bakin Karfe

*Ba za a iya yanke katako kamar mahogany ba

* CO2 Laser kawai alamar karafa ne kawai lokacin anodized ko magani.

 

Nuna Cikakkun bayanai

NOVAS_06
NOVAS_05
NOVAS_11

Marufi da sufuri


  • Na baya:
  • Na gaba:

  • Ƙididdiga na Fasaha:
    Wurin Aiki: 1000*700mm
    Laser Tube: 60W / 80W / 100W (100W buƙatun bututu)
    Nau'in Tube Laser: CO2 tube gilashin rufe
    Tsayin Axis Z: 200mm
    Input Voltage: 220V AC 50Hz/110V AC 60Hz
    Ƙarfin Ƙarfi: 1200-1300W
    Hanyoyin Aiki: Ingantattun raster, vector da yanayin hadewa
    Ƙaddamarwa: 1000DPI
    Matsakaicin Gudun Zane: 1200mm/sec
    Matsakaicin Gudun Yankewa: 1000mm/sec
    Gudun Haɗawa: 1.8
    Ikon gani na Laser: 0-100% saita ta software
    Mafi ƙarancin Girman Zane: Harafin Sinanci 2.0mm*2.0mm, Harafin Turanci 1.0mm*1.0mm
    Gano Daidaitawa: <= 0.1
    Yanke Kauri: 0-10mm (ya dogara da kayan daban-daban)
    Yanayin Aiki: 0-45°C
    Danshi na Muhalli: 5-95%
    Ƙwaƙwalwar ajiya: 128 Mb
    Software masu jituwa: CorelDraw/Photoshop/AutoCAD/Kowane nau'in Software na Embroidery
    Tsarin Aiki Mai jituwa: Windows XP/2000/Vista,Win7/8//10, Mac OS, Linux
    Interface na Computer: Ethernet/USB/WIFI
    Kayan aiki: Kwan zuma & Aluminum tebur tebur
    Tsarin sanyaya: sanyaya ruwa
    Jirgin Sama: waje 135W Pump Air
    Mai shayarwa: Na waje 750W abin hurawa
    Girman Injin: 1520mm*1295*1025mm
    Nauyin Net Net: 420kg
    Nauyin Shiryar Inji: 470kg

    Samfura masu dangantaka

    da