NOVA Series-NOVA7

Short Description:

NOVA7 is a commercial standing model laser engraving and cutting machine. The working area is 700*500mm.It is a very good small commercial standing model of laser engraving and cutting machine. If your place is not big and you mostly used laser machine to do cutting job, this machine could be very suitable for you.


  • :
  • Product Detail

    TECHNICAL SPECIFICATIONS

    Product Tags

    Overall Review

    NOVA7 is a commercial standing model laser engraving and cutting machine. The working area is 700*500mm. From NOVA Series of machine, the designer moved his eyes to the cutting. Therefore, the machine engraving speed is not so fast as MIRA machines. Although it can go 1000mm/sec, the acceleration speed is 2G. However, this speed is enough to be outstanding over other similar machines on the market.

    The structure of the machine is very strong, which makes it more steady. The machine equipped with honeycomb and blade worktable and with model3000 or 5000 chiller, makes possible to install 100W or even 130W laser tube. The Z axis now increased to 200mm, so it can fit in higher products. The air assists system got pressure gauge and regulator to give the users option to add more powerful compressor to cut thicker materials. The front and back material pass through door makes it possible to cut long materials.

    The machine is also built according to Class I laser standard, with fully enclosed machine body and key lock on every door and window. The lid adopted tempered glass for fire proof purpose.

    Overall, the NOVA7 is a very good small commercial standing model of laser engraving and cutting machine. If your place is not big and you mostly used laser machine to do cutting job, this machine could be very suitable for you. 

    Advantages of the NOVA7

    Class 1 Laser Standard

    .The NOVA7 machine case is fully enclosed. There are key locks on every door and window. The main power switch is key lock type, which prevent the machine from those un-authorized person operating the machine. These features make it much more safe.

    Clean pack Technology

    One of the biggest enemy for laser engraving and cutting machine is dust. Smoke and dirty particles will slow down the laser machine and make the outcome bad. The Clean pack design of MIRA  protects the linear guide rail from dust,reduce maintenance frequency effectively,get much better outcome.

    Faster than others

    With Customized stepper motor,high quality Taiwan Linear Guide rail and Japanese bearing, the NOVA7 maximum engraving speed is up to 1000mm/sec,  acceleration speed is 2G. Faster than other similar machines on the market.

    AEON Pro-Smart Software

    The Aeon ProSmart software is user friendly and it has perfect operation functions. You can set parameter details and operate it very easy. It will support all file formats as using on market and can direct work inside of CorelDraw, Illustrator and AutoCAD.Most Importantly, the software is Mac Os compatible! 

    Mufti-Cummunication

    1. The NOVA7 was build with high-speed multi communication system. You can connect to your machine by Wi-Fi, USB cable, LAN network cable and transfer your data by USB Flash disk. Machine has 128 MB memory, LCD screen control panel. With off-line working mode when your electricity down and reboot machine will run on stop position.

    Effective Table and front pass through door

    1. The NOVA7  got ball screw electric up&down table, steady and precision.Z-Axis height is 10mm, can fit in 10mm height products. The front door can open and pass through longer materials.

    Focus more easier

    1. The NOVA7  can install the newly designed Autofocus. The focus for the laser can’t be easier.Just a press with the autofocus on the control panel, it will find its focus automatically.The autofocus device height can be adjustable manually very easy, and it can be install and replace very easy ,too.

    Strong and Modern body

    The Case is made up of very thick galvanized steel plate, which is very strong. The painting is powder type, looks much better. The design is much more modern, which fits seamlessly in modern house. The LED illumination inside the machine makes it shinning in the dark room like a super star.

    Show Details

    NOVAS_10
    NOVAS_09
    NOVAS_07
    NOVAS_06
    NOVAS_05
    NOVAS_11

    Packaging and Transportation


  • Previous:
  • Next:

  • Technical Specifications:
    Working Area: 700*500mm
    Laser Tube: 40W(Standard),60W(with tube extender)
    Laser Tube type: CO2 sealed glass tube
    Z Axis Height: 100mm adjustable
    Input Voltage: 220V AC 50Hz/110V AC 60Hz
    Rated Power: 1200W-1300W
    Operating Modes: Optimized raster,vector and combinedmode mode
    Resolution: 1000DPI
    Max Engraving Speed: 1200mm/sec
    Max Cutting Speed: 1000mm/sec
    Acceleration Speed: 5G
    Laser Optical Control: 0-100% set by software
    Minimum Engraving Size: Chinese Character 2.0mm*2.0mm, English Letter 1.0mm*1.0mm
    Locating Precision: <=0.1
    Cutting Thickness: 0-10mm(depends on different materials )
    Working Temperature: 0-45°C
    Environmental Humidity: 5-95%
    Buffer Memory: 128Mb
    Compatible Software: CorelDraw/Photoshop/AutoCAD/All kinds of Embroidery Software
    Compatible Operation System:  Windows XP/2000/Vista,Win7/8//10, Mac OS, Linux
    Computer Interface: Ethernet/USB/WIFI
    Worktable: Honeycomb
    Cooling system: Built in water cooler with cooling fan
    Air Pump: Built in noise suppression air pump
    Exhaust Fan: Built in Turbo Exhaust blower
    Machine Dimension:
    1220mm*1095mm*1025mm
    Machine Net Weight: 230Kg
    Machine Packing Weight: 280Kg
  • Related Products

    
    WhatsApp Online Chat !