NOVA Elite10 (1000mm*700mm 80W 100W Glass Tube)
Nova Elite10 is a professional co2 laser engraving and cutting machine. The working area is 700*1000mm Nova10 Elite's engraving speed is faster than MIRA series machines. Up to 1200mm/sec, the acceleration speed is 5G, has the fastest speed in its class. The structure of the Nova10 elite is very strong, which makes it more steady. Nova Elite10 equipped with a honeycomb and a blade worktable and with a model 5200 chiller, makes it possible to install a 100W or even 130W laser tube. The Z-axis now increased to 200mm, so it can fit in higher products. The air assists system got a pressure gauge and regulator to give the users option to add a more powerful compressor to cut thicker materials. The front and back material pass-through door makes it possible to cut long materials.
Advantages of the Nova Elite10
Super Strong Fully Enclosed Machine Body
The Elite NOVA10 is built like a tank. The main structure adopted a thick steel tube, which ensured strength. The whole body was fully enclosed, with sealing on every door and window, more safety.
Clean pack Technology
One of the biggest enemies of laser engraving and cutting machines is dust. Smoke and dirty particles will slow down the laser machine and make the outcome bad. The Clean pack design of NOVA Elite10 protects the linear guide rail from dust, reduces maintenance frequency effectively, gets a much better outcome.
The Nova Elite10 has a built-in 330W Exhaust Fan, 5000 Water Chiller. All in one Design - friendly for starters and save much room.
(2”,2.5”,4” focus lens position)
Integrated Autofocus The newly designed laser head features an integrated autofocusing mechanism that is lightweight and a whole lot more accurate. Say goodbye to collisions and gouged material.
Convenient Scrap and Product Collecting System
All of your cut pieces now fall into a conveniently located compartment below, which can be easily emptied to prevent scrap pieces from piling up and becoming a fire hazard.
Effective Table and front pass through door
The Nova Elite10 got a ball screw electric up&down table, steady and precise. Z-Axis height is 200mm, can fit in 200mm height products. The front door can open and pass through longer materials.
AEON NOVA Elite10 Material Applications
*Cannot cut hardwoods like mahogany
*CO2 lasers only mark bare metals when anodized or treated.
Packaging and Transportation
|1000*700mm（39 3/8″ x 27 9/16″)
|1500*1210*1025mm (59 1/16″ x 47 41/64″ x 40 23/64″)
|1000 lb (450kg)
|Honeycomb + Blade
|80W/100W CO2 Glass Tube
|200mm (7 7/8″) Adjustable
|105W Built-In Air Pump
|Elite10 330W Built-In Exhaust Fan, Elite14,16 550W Built in Exhaust Fan
|Elite10 Built-in 5000 Water Chiller, Elite14,16 Built-in 5200 Chiller
|220V AC 50Hz/110V AC 60Hz
|0-30mm(depends on different materials )
|Max Acceleration Speed
|Laser Optical Control
|0-100% Set by software
|Minimum Engraving Size
|Minimum Font Size 1.0mm x 1.0mm(English Letter) 2.0mm*2.0mm(Chinese Character)
|Red Dot Positioning
|Graphic Format Supported
|CorelDraw/Photoshop/AutoCAD/All kinds of Embroidery Software