Bottom price Engraving And Cutting Nonmetal Machine - VEGA Series-VEGA15 – AEON
Bottom price Engraving And Cutting Nonmetal Machine - VEGA Series-VEGA15 – AEON Detail:
VEGA15 is a commercial standing model laser engraving and cutting machine. The working area is 1400*900mm. For VEGA Series of machine, It mainly designed to satisfied those who want to cut certain thickness of flat materials. The machine engraving speed is not so fast as MIRA machines. Although it can go 1000mm/sec, the acceleration speed is 2G. However, this speed is enough to be outstanding over other similar machines on the market. The VEGA Series does not have up and down working table, the worktable is funnel type with drawer underneath to collect the small pieces cut by the machine.
The structure of the machine is very strong, which makes it more steady. The machine equipped with honeycomb and blade worktable and with model3000 or 5000 chiller, makes possible to install 100W or even 130W laser tube. The air assists system got pressure gauge and regulator to give the users option to add more powerful compressor to cut thicker materials. The front and back material pass through door makes it possible to cut long materials.
The machine is also built according to Class I laser standard, with fully enclosed machine body and key lock on every door and window. The lid adopted tempered glass for fire proof purpose.
Overall, the VEGA15 is a very good commercial standing model of laser engraving and cutting machine. It can fit in larger size materials, and could install higher power laser tube to cut thicker materials. It will be an ideal machine for your business and will bring you profit for sure. And with this model, it a little economic than NOVA14 since it got no up and down working table.
Advantages of the VEGA15
1.Clean pack Technology.One of the biggest enemy for laser engraving and cutting machine is dust. Smoke and dirty particles will slow down the laser machine and make the outcome bad. The Clean pack design of VEGA15 protects the linear guide rail from dust,reduce maintenance frequency effectively,get much better outcome.
1.Class 1 Laser Standard. The VEGA15 machine case is fully enclosed. There are key locks on every door and window. The main power switch is key lock type, which prevent the machine from those un-authorized person operating the machine. These features make it much more safe.
2.Faster than others. With Customized stepper motor,high quality Taiwan Linear Guide rail and Japanese bearing, the VEGA15 maximum engraving speed is up to 1000mm/sec, acceleration speed is 2G. Faster than other similar machines on the market.
3.AEON Pro-Smart Software. The Aeon ProSmart software is user friendly and it has perfect operation functions. You can set parameter details and operate it very easy. It will support all file formats as using on market and can direct work inside of CorelDraw, Illustrator and AutoCAD.Most Importantly, the software is Mac Os compatible!
4.Mufti-Cummunication.The VEGA15 was build with high-speed multi communication system. You can connect to your machine by Wi-Fi, USB cable, LAN network cable and transfer your data by USB Flash disk. Machine has 128 MB memory, LCD screen control panel. With off-line working mode when your electricity down and reboot machine will run on stop position.
5.Effective Table and front back pass through door.The VEGA got
ball screw electric up&down table, steady and precision.Z-Axis height is 200mm, can fit in 200mm height products. The front and back pass through door can fit into the long materials. The funnel worktable with drawer underneath will collect the waste materials or small products very easy and convenient.
6.Strong and Modern body. The Case is made up of very thick galvanized steel plate, which is very strong. The painting is powder type, looks much better. The design is much more modern, which fits seamlessly in modern house. The LED illumination inside the machine makes it shinning in the dark room like a super star.
7.Smart Rotary Device.
Working Area: 1400*900mm
Laser Tube: 80W/100W/130W/150W(with tube extender)
Laser Tube type: CO2 sealed glass tube.
Z Axis Height: 200mm adjustable
Input Voltage: 220V AC 50Hz/110V AC 60Hz
Rated Power: 2000W-2500W
Operating Modes: Optimized raster,vector and combined mode
Max Engraving Speed: 1000mm/sec
Max Cutting Speed: 400mm/sec
Acceleration Speed: 2G
Laser Optical Control: 0-100% set by software
Minimum Engraving Size：Chinese Character 2.0mm*2.0mm, English Letter 1.0mm*1.0mm
Locating Precision: <=0.1
Cutting Thickness: 0-20mm(depends on different materials )
Working Temperature: 0-45°C
Environmental Humidity: 5-95%
Buffer Memory: 128Mb
Compatible Software: CorelDraw/Photoshop/AutoCAD/All kinds of Embroidery Software
Compatible Operation System: Windows XP/2000/Vista,Win7/8//10, Mac OS, Linux
Computer Interface: Ethernet/USB/WIFI
Worktable: Blade Table
Cooling system: WJ300/5000 Chiller
Air Pump: 135W air compressor
Exhaust Fan: 550W blower
Machine Dimension: 1480mm*1925mm*1125mm
Machine Net Weight: 480Kg
Machine Packing Weight: 550Kg
Product detail pictures:
Related Product Guide:
Wood Cutting Machines Market 2019 Research Report includes Size, Share, Manufacturing Base Distribution, Sales Area and Product Type Forecast to 2026 | Mdf Laser Engraving Machine
High Capacity Laser Cutting Machines Market Growth by Region, Application, Top Companies, Driver, Trends & Forecasts to 2025 | Mini Cnc Laser
Our organization promises all customers with the first-class products and solutions and the most satisfying post-sale service. We warmly welcome our regular and new clients to join us for Bottom price Engraving And Cutting Nonmetal Machine - VEGA Series-VEGA15 – AEON, The product will supply to all over the world, such as: Zambia , Portugal , Mecca , For many years, we now have adhered to the principle of customer oriented, quality based, excellence pursuing, mutual benefit sharing. We hope, with great sincerity and good will, to have the honor to help with your further market.
By Phyllis from Belarus - 2015.07.27 12:26
A good manufacturers, we have cooperated twice, good quality and good service attitude.
By Andy from Slovenia - 2015.09.23 17:37