< img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=413481477826727&ev=PageView&noscript=1" />

Imibuzo Evame Ukubuzwa

FAQ

IMIBUZO EJWAYELEKILE UKUBUZWA

1.Iwaranti kanye Nezesekeli Zomshini

1).Ithini inqubomgomo yakho yewaranti? Uyifeza kanjani?

Sinikeza iwaranti yonyaka owodwa emishini yethu. Ukwengeza, ezingxenyeni ezithile, ukufakwa kwewaranti yethu kungokulandelayo:

  • Ishubhu ye-laser, izibuko, nelensi yokugxila: iwaranti yezinyanga eziyisi-6
  • Kumashubhu e-laser e-RECI: Ukufakwa kwezinyanga eziyi-12
  • Izinsimbi zomhlahlandlela: iwaranti yeminyaka engu-2

Noma yiziphi izinkinga ezingase ziphakame kuso sonke isikhathi sewaranti zizoxazululwa ngokushesha. Sinikeza izingxenye ezishintshayo zamahhala ukuze siqinisekise ukuthi umshini wakho usebenza ngokuqhubekayo.

2).Ingabe umshini une-Chiller, i-Exhaust fan, ne-Air Compressor?
Imishini yethu iklanywe ngokucophelela ukuze ifake zonke izesekeli ezibalulekile ngaphakathi kweyunithi. Lapho uthola umshini wethu, qiniseka ukuthi uzothola zonke izingxenye ezidingekayo, uqinisekise ukusetha okungenamthungo kanye nenqubo yokusebenza.

2.Ingakanani impilo yeshubhu le-laser?

Ukuphila kweshubhu ye-laser evamile cishe amahora angu-5000, kuye ngokusetshenziswa kwayo. Ngokuphambene, ishubhu le-RF linesikhathi eside sempilo cishe samahora angu-20000.

3.Iyiphi isofthiwe enconywayo yokuklama amaphrojekthi ami?

Ukuze uthole imiphumela emihle, sincomausebenzisaI-CorelDrawnomaI-AutoCADngokudala imiklamo yakho. Lawa mathuluzi edizayini anamandla ahlinzeka ngezici ezinhle kakhulu zomsebenzi wobuciko onemininingwane. Uma umklamo wakho usuqedile, ungangeniswa kalula kuwoRDWorks or I-LightBurn, lapho ungamisa khona amapharamitha futhi ulungiselele kahle iphrojekthi yakho yokuqoshwa kwe-laser noma ukusika. Lokhu kuhamba komsebenzi kuqinisekisa inqubo yokusetha ebushelelezi futhi enembile.

4.Yini usayizi ojwayelekile wesibuko sakho esikhanyayo?

 

I-MIRA: 2*φ25 1*φ20

I-REDLINE MIRA S:3*φ25

I-NOVA Super& Elite:3*φ25

I-REDLINE NOVA Super& Elite:3*φ25

5.Ngingakwazi ukufaka amalensi ahlukene ekhanda le-laser?
Okujwayelekile Ongakukhetha
I-MIRA 2.0" ilensi 1.5" Ilensi
I-NOVA 2.5" Ilensi 2" Ilensi
I-REDLINE MIRA S 2.0" ilensi 1.5" & 4" Ilensi
I-REDLINE NOVA Elite & Super 2.5" Ilensi 2" & 4" Ilensi
6.Yimaphi amafayela isofthiwe ye-Rdworks ehambisana nawo?

JPG, PNG, BMP, PLT, DST, DXF, CDR, AI, DSB, GIF, MNG, TIF, TGA,PCX, JP2, JPC, PGX, RAS, PNM, SKA, RAW

7.Ingabe i-laser yakho ingaqoshwa ensimbi?

Kuya ngesimo.

Imishini yethu ye-laser ingaqopha ngokuqondile ezinsimbi ezifakwe i-anodized nezipendiwe, ilethe imiphumela yekhwalithi ephezulu.

Nokho, ukuqoshwa okuqondile ensimbi engenalutho kulinganiselwe. Ezimweni ezithile, i-laser ingamaka izinsimbi ezithile ezingenalutho lapho isebenzisa okunamathiselwe kwe-HR ngesivinini esincishiswe kakhulu.

Ukuze uthole imiphumela emihle ezindaweni zensimbi ezingenalutho, sincoma ukusebenzisa isifutho se-Thermark. Lokhu kuthuthukisa ikhono le-laser lokudala imiklamo eyinkimbinkimbi kanye nezimpawu ensimbi, kuqinisekisa imiphumela emihle kakhulu futhi kwandise ububanzi bamathuba okuqoshwa kwensimbi.

8.Angazi lutho ngalo mshini, hlobo luni lomshini okufanele ngiwukhethe?

Vele usitshele ukuthi yini ofuna ukuyenza ngokusebenzisa umshini we-laser, bese usivumela ukuthi sikunikeze izixazululo neziphakamiso zochwepheshe.

Sicela usitshele lolu lwazi, sizoncoma isixazululo esingcono kakhulu.

1) Izinto zakho
2) Ubukhulu obukhulu bezinto zakho
3) Max ukusika ukujiya
4) Ukujiya okujwayelekile kokusika

9.Ngesikhathi ngithola lo mshini, kodwa angazi ukuthi ngiwusebenzisa kanjani. Kumele ngenzeni?

Sizothumela amavidiyo namanuwali esiNgisi ngomshini. Uma usenokungabaza okuthile, singakhuluma ngocingo noma ngoWhatsapp nange-e-mail.

10.Umnyango wami mncane kakhulu, ungakwazi ukuhlukanisa umzimba womshini?

Yebo, i-NOVA ingahlukaniswa ibe izingxenye ezimbili ukuze ingene eminyango emincane. Uma usuhlakaziwe, ubude bomzimba obuncane bungama-75 cm.

UFUNA UKUSEBENZA NATHI?

XHUMANA NATHI
...