آلة النقش بالليزر AEON NOVA10
Advantages of the NOVA10

Clean Pack Design
One of the biggest enemies of laser engraving and cutting machines is dust. Smoke and dirty particles will slow down the laser machine and make the outcome bad. The Clean pack design of NOVA10 protects the linear guide rail from dust, reduces maintenance frequency effectively, gets a much better outcome.
AEON ProSMART Software
The Aeon ProSmart software is user-friendly and it has perfect operation functions. You can set technic details and operate it very easy. It will support all file formats as using on market and can direct work inside of CorelDraw, Illustrator and AutoCAD. Even you can use a direct-print function like printers CTRL+P.


Multi Communication
The new NOVA10 was built on a high-speed multi-communication system. You can connect to your machine by Wi-Fi, USB cable, LAN network cable, and transfer your data by USB Flash disk. Machines have 256 MB memory, easy use color screen control panel. With off-line working mode when your electricity is down and the open machine will run on stop position.
Multi Functional Table Design
Depends on your material you have to use different working tables. The new NOVA10 has a HoneyComb table, Blade table as standard configuration. It has to vacuum under the honeycomb table. With the pass-through design easy Access to use big size material.
*Nova models have a 20cm up/down lift platform with the vacuuming table.


Faster Than Others
The new NOVA10 designed a maximum effective working style. With the high-speed digital step motors, Taiwan made linear guides, Japanese bearings, and maximum speed design it will up to 1200mm/second engraving speed, 300 mm/second cutting speed with 1.8G acceleration. The best choice in the market.
Strong, Seperatable and Modern Body
The new Nova10 was designed by AEON Laser. It was built on 10 years of experience, customer feedback. The body can separate 2 parts to move it from any door size 80cm. LED Lights from left and right side looking machine inside view very bright.

تطبيقات المواد
قطع بالليزر | Laser Engraving |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
*Cannot cut hardwoods like mahogany
*CO2 lasers only mark bare metals when anodized or treated.
المواصفات الفنية: | |
مساحة العمل: | 1000*700mm |
ليزر أنبوب: | 60W/80W/100W(100W need tube extender) |
ليزر أنبوب نوع: | CO2 أنبوب زجاجي مختومة |
Z محور الطول: | 200mm |
مساهمة الجهد: | 220V AC 50HZ / 60HZ 110V AC |
القوة المصنفة: | 1200W-1300W |
أوضاع التشغيل: | Optimized raster,vector and combinedmode mode |
القرار: | 1000DPI |
ماكس سرعة الحفر: | 1200MM / ثانية |
أقصى سرعة القطع: | 1000MM / ثانية |
تسريع سرعة: | 1.8 |
تحكم ليزر بصري: | 0-100٪ التي حددها البرنامج |
الحد الأدنى النقش الحجم: | الأحرف 2.0MM الصيني * 2.0MM، 1.0MM رسالة الإنجليزية * 1.0MM |
تحديد الدقة: | <= 0.1 |
قطع سمك: | 0-10mm (يعتمد على مواد مختلفة) |
درجة حرارة العمل: | 0-45 ° C |
الرطوبة البيئية: | 5-95٪ |
العازلة الذاكرة: | 128MB |
متوافق مع برامج: | الطلاء / فوتوشوب / أوتوكاد / جميع أنواع التطريز البرمجيات |
المتوافقة مع نظام التشغيل: | ويندوز XP / 2000 / فيستا، WIN7 / 8 // 10، ماك OS، لينكس |
واجهة الكمبيوتر: | إيثرنت / USB / WIFI |
طاولة العمل: | Honeycomb & Aluminum bar table |
نظام التبريد: | water cooling |
مضخة هواء: | external 135W Air Pump |
مروحة العادم: | External 750W blower |
آلة البعد: | 1520mm*1295mm*1025mm |
آلة الوزن الصافي: | 420Kg |
آلة التعبئة الوزن: | 470Kg |