AEON VEGA Series-VEGA15

Kort beskrivelse:

AEON VEGA15 is a commercial standing model laser engraving and cutting machine. The working area is 1500*800mm. For VEGA Series of machine, It mainly designed to satisfied those who want to cut certain thickness of flat materials. The machine engraving speed is not so fast as MIRA machines. Although it can go 1000mm/sec, the acceleration speed is 2G. However, this speed is enough to be outstanding over other similar machines on the market. The VEGA Series does not have up and down working table, the worktable is funnel type with drawer underneath to collect the small pieces cut by the machine.


Produkt detalj

TECHNICAL SPECIFICATIONS

produkt~~POS=TRUNC

Samlet omtale

AEON VEGA15 is a commercial standing model laser engraving and cutting machine. The working area is 1500*800mm. The VEGA Series of a machine, It mainly designed to satisfy those who want to cut certain thicknesses of flat materials. The machine engraving speed is not so fast as MIRA machines. Although it can go 1000mm/sec, the acceleration speed is 2G. However, this speed is enough to be outstanding over other similar machines on the market. The VEGA series does not have an up and down working table, the worktable is funnel type with a drawer underneath to collect the small pieces cut by the machine.
The structure of the machine is very strong, which makes it more steady. The machine equipped with honeycomb and blade worktable and with model3000 or 5000 chillers, makes it possible to install 100W or even 130W laser tube. The air assists system got pressure gauge and regulator to give the users option to add a more powerful compressor to cut thicker materials. The front and back material pass-through door makes it possible to cut long materials.
The machine is also built according to Class I laser standard, with a fully enclosed machine body and key lock on every door and window. The lid adopted tempered glass for fireproof purposes.
Overall, the VEGA15 is a very good commercial standing model of laser engraving and cutting machine. It can fit in larger size materials and could install higher power laser tubes to cut thicker materials. It will be an ideal machine for your business and will bring you profit for sure. And with this model, it a little economical than NOVA14 since it got no up and down working table.

Advantages of the VEGA15

Clean pakke Technology

One of the biggest enemies of laser engraving and cutting machines is dust. Smoke and dirty particles will slow down the laser machine and make the outcome bad. The Clean pack design of VEGA15 protects the linear guide rail from dust, reduces maintenance frequency effectively, gets a much better outcome.

Klasse 1 laser Standard

The VEGA15 machine case is fully enclosed. There are key locks on every door and window. The main power switch is key lock type, which prevents the machine from those unauthorized persons operating the machine. These features make it much safer.


Raskere enn andre

With a Customized stepper motor, high-quality Taiwan Linear Guide rail, and Japanese bearing, the VEGA15 maximum engraving speed is up to 1000mm/sec, acceleration speed is 2G. Faster than other similar machines on the market.


AEON Pro-Smart Software

The Aeon ProSmart software is user-friendly and it has perfect operation functions. You can set parameter details and operate them very easily. It will support all file formats as using on market and can direct work inside of CorelDraw, Illustrator, and AutoCAD.Most Importantly, the software is Mac Os compatible!


Mufti-Cummunication

The VEGA15 was build with high-speed multi communication system. You can connect to your machine by Wi-Fi, USB cable, LAN network cable and transfer your data by USB Flash disk. Machine has 128 MB memory, LCD screen control panel. With off-line working mode when your electricity down and reboot machine will run on stop position.


Effective Table and front back pass through door

The VEGA got ball screw electric up&down table, steady and precision.Z-Axis height is 200mm, can fit in 200mm height products. The front and back pass through door can fit into the long materials. The funnel worktable with drawer underneath will collect the waste materials or small products very easy and convenient.


Sterk og moderne kropp

The Case består av svært tykk galvanisert stålplate, noe som er veldig sterk. Maleriet er pulver type, ser mye bedre. Designen er mye mer moderne, som passer sømløst i moderne hus. LED-belysningen inne i maskinen gjør det shinning i mørke rom som en super star.



  • Forrige:
  • Neste:

  • Tekniske spesifikasjoner:
    Arbeidsplass: 1500*800mm
    Laser Tube: 80W/100W/130W/150W(with tube extender)
    Laser Tube Type: CO2 sealed glass tube.
    Z Axis Høyde: 200mm adjustable
    Inngangsspenning: 220V AC 50Hz / 110V AC 60Hz
    Nominell effekt: 2000W-2500W
    Driftsmoduser: Optimized raster,vector and combined mode
    Vedtak: 4000DPI
    Max Gravering Hastighet: 1000 mm / sek
    Max Cutting Speed: 400mm/sec
    Akselerasjon Hastighet: 2G
    Laser Optisk kontroll: 0-100% satt av programvare
    Minimum Gravering Størrelse: Kinesiske tegn 2.0mm * 2.0mm, engelsk Letter 1.0mm * 1.0mm
    Finne Presisjon: <= 0.1
    Cutting Tykkelse: 0-20mm(depends on different materials )
    Arbeidstemperatur: 0 til 45 ° C
    Miljø Fuktighet: 5-95%
    Buffer Minne: 128MB
    Kompatibel programvare: Coreldraw / Photoshop / AutoCAD / Alle typer Embroidery Software
    Kompatibel Operation System: Windows XP/2000/Vista,Win7/8//10, Mac OS, Linux
    Computer Interface: Ethernet / USB / WIFI
    Arbeidsbord: Blade Table
    Kjølesystem: WJ300/5000 Chiller
    Luft pumpe: 135W air compressor
    Avtrekksvifte: 550W blower
    Machine Dimensjon: 2050mm*1395mm*1025mm
    Machine Vekt: 540Kg
    Maskinen Pakke vekt: 590Kg
  • Relaterte produkter