AEON VEGA Series-VEGA15

간단한 설명:

AEON VEGA15 is a commercial standing model laser engraving and cutting machine. The working area is 1500*800mm. For VEGA Series of machine, It mainly designed to satisfied those who want to cut certain thickness of flat materials. The machine engraving speed is not so fast as MIRA machines. Although it can go 1000mm/sec, the acceleration speed is 2G. However, this speed is enough to be outstanding over other similar machines on the market. The VEGA Series does not have up and down working table, the worktable is funnel type with drawer underneath to collect the small pieces cut by the machine.


제품 상세 정보

TECHNICAL SPECIFICATIONS

제품 태그

전반적으로 검토

AEON VEGA15 is a commercial standing model laser engraving and cutting machine. The working area is 1500*800mm. The VEGA Series of a machine, It mainly designed to satisfy those who want to cut certain thicknesses of flat materials. The machine engraving speed is not so fast as MIRA machines. Although it can go 1000mm/sec, the acceleration speed is 2G. However, this speed is enough to be outstanding over other similar machines on the market. The VEGA series does not have an up and down working table, the worktable is funnel type with a drawer underneath to collect the small pieces cut by the machine.
The structure of the machine is very strong, which makes it more steady. The machine equipped with honeycomb and blade worktable and with model3000 or 5000 chillers, makes it possible to install 100W or even 130W laser tube. The air assists system got pressure gauge and regulator to give the users option to add a more powerful compressor to cut thicker materials. The front and back material pass-through door makes it possible to cut long materials.
The machine is also built according to Class I laser standard, with a fully enclosed machine body and key lock on every door and window. The lid adopted tempered glass for fireproof purposes.
Overall, the VEGA15 is a very good commercial standing model of laser engraving and cutting machine. It can fit in larger size materials and could install higher power laser tubes to cut thicker materials. It will be an ideal machine for your business and will bring you profit for sure. And with this model, it a little economical than NOVA14 since it got no up and down working table.

Advantages of the VEGA15

클린 팩 기술

One of the biggest enemies of laser engraving and cutting machines is dust. Smoke and dirty particles will slow down the laser machine and make the outcome bad. The Clean pack design of VEGA15 protects the linear guide rail from dust, reduces maintenance frequency effectively, gets a much better outcome.

1 등급 레이저 표준

The VEGA15 machine case is fully enclosed. There are key locks on every door and window. The main power switch is key lock type, which prevents the machine from those unauthorized persons operating the machine. These features make it much safer.


다른 사람보다 빠른

With a Customized stepper motor, high-quality Taiwan Linear Guide rail, and Japanese bearing, the VEGA15 maximum engraving speed is up to 1000mm/sec, acceleration speed is 2G. Faster than other similar machines on the market.


AEON 프로 - 스마트 소프트웨어

The Aeon ProSmart software is user-friendly and it has perfect operation functions. You can set parameter details and operate them very easily. It will support all file formats as using on market and can direct work inside of CorelDraw, Illustrator, and AutoCAD.Most Importantly, the software is Mac Os compatible!


평복 - Cummunication

The VEGA15 was build with high-speed multi communication system. You can connect to your machine by Wi-Fi, USB cable, LAN network cable and transfer your data by USB Flash disk. Machine has 128 MB memory, LCD screen control panel. With off-line working mode when your electricity down and reboot machine will run on stop position.


Effective Table and front back pass through door

The VEGA got ball screw electric up&down table, steady and precision.Z-Axis height is 200mm, can fit in 200mm height products. The front and back pass through door can fit into the long materials. The funnel worktable with drawer underneath will collect the waste materials or small products very easy and convenient.


강력하고 현대의 몸

사례는 매우 강하다 매우 두꺼운 아연 도금 강판,로 구성되어 있습니다. 그림은, 분말 타입 훨씬 더 보인다. 현대 집에 완벽하게 맞는 디자인입니다 훨씬 더 현대. 기계 내부의 LED 조명은 슈퍼 스타처럼 어두운 방에 빛나게합니다.



  • 이전 :
  • 다음 :

  • 기술 사양:
    업무 공간: 1500*800mm
    레이저 튜브 : 80W/100W/130W/150W(with tube extender)
    레이저 튜브 타입 : CO2 sealed glass tube.
    Z 축 높이 : 200mm adjustable
    입력 전압 : 220V AC 50Hz의 / 110V AC 60Hz의
    정격 전력: 2000W-2500W
    운영 모드 : Optimized raster,vector and combined mode
    해결: 4000DPI
    최대 조각 속도 : 1,000mm / 초
    최대 절단 속도 : 400mm/sec
    가속 속도 : 2G
    레이저 광 제어 : 0 ~ 100 % 소프트웨어에 의해 설정
    최소 조각 크기 : 한자 2.0MM의 *의 2.0MM, 영어 문자 1.0mm 인의 * 1.0mm의
    정밀 찾기 : <= 0.1
    두께를 절단 : 0-20mm(depends on different materials )
    작동 온도: 0-45 ° C
    환경 습도 : 5~95%
    버퍼 메모리 : 128MB의
    지원되는 소프트웨어 : 코렐 드로우 / 포토샵 /의 AutoCAD / 자수 소프트웨어의 모든 종류의
    지원되는 운영 시스템 : Windows XP/2000/Vista,Win7/8//10, Mac OS, Linux
    컴퓨터 인터페이스 : 이더넷 / USB / WIFI
    작업대: Blade Table
    냉각 시스템 : WJ300/5000 Chiller
    공기 펌프: 135W air compressor
    환풍기: 550W blower
    기계 차원 : 2050mm*1395mm*1025mm
    기계 순 중량 : 540Kg
    기계 포장 무게 : 590Kg
  • 관련 상품