AEON VEGA Series-VEGA15

簡単な説明:

AEON VEGA15 is a commercial standing model laser engraving and cutting machine. The working area is 1500*800mm. For VEGA Series of machine, It mainly designed to satisfied those who want to cut certain thickness of flat materials. The machine engraving speed is not so fast as MIRA machines. Although it can go 1000mm/sec, the acceleration speed is 2G. However, this speed is enough to be outstanding over other similar machines on the market. The VEGA Series does not have up and down working table, the worktable is funnel type with drawer underneath to collect the small pieces cut by the machine.


製品の詳細

TECHNICAL SPECIFICATIONS

商品のタグ

全体的にレビュー

AEON VEGA15 is a commercial standing model laser engraving and cutting machine. The working area is 1500*800mm. The VEGA Series of a machine, It mainly designed to satisfy those who want to cut certain thicknesses of flat materials. The machine engraving speed is not so fast as MIRA machines. Although it can go 1000mm/sec, the acceleration speed is 2G. However, this speed is enough to be outstanding over other similar machines on the market. The VEGA series does not have an up and down working table, the worktable is funnel type with a drawer underneath to collect the small pieces cut by the machine.
The structure of the machine is very strong, which makes it more steady. The machine equipped with honeycomb and blade worktable and with model3000 or 5000 chillers, makes it possible to install 100W or even 130W laser tube. The air assists system got pressure gauge and regulator to give the users option to add a more powerful compressor to cut thicker materials. The front and back material pass-through door makes it possible to cut long materials.
The machine is also built according to Class I laser standard, with a fully enclosed machine body and key lock on every door and window. The lid adopted tempered glass for fireproof purposes.
Overall, the VEGA15 is a very good commercial standing model of laser engraving and cutting machine. It can fit in larger size materials and could install higher power laser tubes to cut thicker materials. It will be an ideal machine for your business and will bring you profit for sure. And with this model, it a little economical than NOVA14 since it got no up and down working table.

Advantages of the VEGA15

クリーンパック・テクノロジー

One of the biggest enemies of laser engraving and cutting machines is dust. Smoke and dirty particles will slow down the laser machine and make the outcome bad. The Clean pack design of VEGA15 protects the linear guide rail from dust, reduces maintenance frequency effectively, gets a much better outcome.

クラス1レーザー標準

The VEGA15 machine case is fully enclosed. There are key locks on every door and window. The main power switch is key lock type, which prevents the machine from those unauthorized persons operating the machine. These features make it much safer.


他よりも速く

With a Customized stepper motor, high-quality Taiwan Linear Guide rail, and Japanese bearing, the VEGA15 maximum engraving speed is up to 1000mm/sec, acceleration speed is 2G. Faster than other similar machines on the market.


AEONプロのスマートソフトウェア

The Aeon ProSmart software is user-friendly and it has perfect operation functions. You can set parameter details and operate them very easily. It will support all file formats as using on market and can direct work inside of CorelDraw, Illustrator, and AutoCAD.Most Importantly, the software is Mac Os compatible!


ムフティ-Cummunication

The VEGA15 was build with high-speed multi communication system. You can connect to your machine by Wi-Fi, USB cable, LAN network cable and transfer your data by USB Flash disk. Machine has 128 MB memory, LCD screen control panel. With off-line working mode when your electricity down and reboot machine will run on stop position.


Effective Table and front back pass through door

The VEGA got ball screw electric up&down table, steady and precision.Z-Axis height is 200mm, can fit in 200mm height products. The front and back pass through door can fit into the long materials. The funnel worktable with drawer underneath will collect the waste materials or small products very easy and convenient.


強いと現代ボディ

ケースは非常に強い非常に厚い亜鉛メッキ鋼板、で構成されています。 絵画は、粉末タイプで非常に良く見えます。 デザインは近代的な家の中にシームレスに適合した、はるかに近代的です。 機械内部のLED照明は、それがスーパースターのような暗い部屋に輝いてます。



  • 前:
  • 次へ:

  • 技術仕様:
    作業領域: 1500*800mm
    レーザ管: 80W/100W/130W/150W(with tube extender)
    レーザー管の種類: CO2 sealed glass tube.
    Z軸の高さ: 200mm adjustable
    入力電圧: 220V AC 50Hzの/ 60Hzの110V AC
    定格出力: 2000W-2500W
    動作モード: Optimized raster,vector and combined mode
    解決: 4000DPI
    最大彫刻速度: 千ミリメートル/秒
    最大切削速度: 400mm/sec
    加速度: 2G
    レーザー光制御: 0から100パーセントソフトウェアによって設定
    最小彫刻サイズ: 漢字の2.0ミリメートルの*の2.0ミリメートル、英語の手紙1.0ミリメートルの*の1.0ミリメートル
    精度の検索: <= 0.1
    厚さをカット: 0-20mm(depends on different materials )
    作業温度: 0-45°C
    環境湿度: 5から95パーセント
    バッファメモリ: 128MB
    互換性のあるソフトウェア: CorelDrawの/ Photoshopの/ AutoCADの/刺繍ソフトウェアのすべての種類
    互換性のある操作システム: Windows XP/2000/Vista,Win7/8//10, Mac OS, Linux
    コンピュータインタフェース: イーサネット/ USB / WIFI
    仕事台: Blade Table
    冷却システム: WJ300/5000 Chiller
    空気ポンプ: 135W air compressor
    換気扇: 550W blower
    機械寸法: 2050mm*1395mm*1025mm
    マシンの正味重量: 540Kg
    機械梱包重量: 590Kg
  • 関連製品