AEON VEGA Series-VEGA15

લઘુ વર્ણન:

AEON VEGA15 is a commercial standing model laser engraving and cutting machine. The working area is 1500*800mm. For VEGA Series of machine, It mainly designed to satisfied those who want to cut certain thickness of flat materials. The machine engraving speed is not so fast as MIRA machines. Although it can go 1000mm/sec, the acceleration speed is 2G. However, this speed is enough to be outstanding over other similar machines on the market. The VEGA Series does not have up and down working table, the worktable is funnel type with drawer underneath to collect the small pieces cut by the machine.


ઉત્પાદન વિગતવાર

TECHNICAL SPECIFICATIONS

ઉત્પાદન ટૅગ્સ

એકંદરે સમીક્ષા

AEON VEGA15 is a commercial standing model laser engraving and cutting machine. The working area is 1500*800mm. The VEGA Series of a machine, It mainly designed to satisfy those who want to cut certain thicknesses of flat materials. The machine engraving speed is not so fast as MIRA machines. Although it can go 1000mm/sec, the acceleration speed is 2G. However, this speed is enough to be outstanding over other similar machines on the market. The VEGA series does not have an up and down working table, the worktable is funnel type with a drawer underneath to collect the small pieces cut by the machine.
The structure of the machine is very strong, which makes it more steady. The machine equipped with honeycomb and blade worktable and with model3000 or 5000 chillers, makes it possible to install 100W or even 130W laser tube. The air assists system got pressure gauge and regulator to give the users option to add a more powerful compressor to cut thicker materials. The front and back material pass-through door makes it possible to cut long materials.
The machine is also built according to Class I laser standard, with a fully enclosed machine body and key lock on every door and window. The lid adopted tempered glass for fireproof purposes.
Overall, the VEGA15 is a very good commercial standing model of laser engraving and cutting machine. It can fit in larger size materials and could install higher power laser tubes to cut thicker materials. It will be an ideal machine for your business and will bring you profit for sure. And with this model, it a little economical than NOVA14 since it got no up and down working table.

Advantages of the VEGA15

શુધ્ધ પેક ટેકનોલોજી

One of the biggest enemies of laser engraving and cutting machines is dust. Smoke and dirty particles will slow down the laser machine and make the outcome bad. The Clean pack design of VEGA15 protects the linear guide rail from dust, reduces maintenance frequency effectively, gets a much better outcome.

વર્ગ 1 લેસર સ્ટાન્ડર્ડ

The VEGA15 machine case is fully enclosed. There are key locks on every door and window. The main power switch is key lock type, which prevents the machine from those unauthorized persons operating the machine. These features make it much safer.


અન્ય કરતાં ઝડપી

With a Customized stepper motor, high-quality Taiwan Linear Guide rail, and Japanese bearing, the VEGA15 maximum engraving speed is up to 1000mm/sec, acceleration speed is 2G. Faster than other similar machines on the market.


કલ્પ પ્રો-સ્માર્ટ સોફ્ટવેર

The Aeon ProSmart software is user-friendly and it has perfect operation functions. You can set parameter details and operate them very easily. It will support all file formats as using on market and can direct work inside of CorelDraw, Illustrator, and AutoCAD.Most Importantly, the software is Mac Os compatible!


મુફ્તી-Cummunication

The VEGA15 was build with high-speed multi communication system. You can connect to your machine by Wi-Fi, USB cable, LAN network cable and transfer your data by USB Flash disk. Machine has 128 MB memory, LCD screen control panel. With off-line working mode when your electricity down and reboot machine will run on stop position.


Effective Table and front back pass through door

The VEGA got ball screw electric up&down table, steady and precision.Z-Axis height is 200mm, can fit in 200mm height products. The front and back pass through door can fit into the long materials. The funnel worktable with drawer underneath will collect the waste materials or small products very easy and convenient.


મજબૂત અને આધુનિક શરીર

કેસ ખૂબ જાડા ગેલ્વેનાઈઝ્ડ સ્ટીલ પ્લેટ, કે જે ખૂબ જ મજબૂત છે બનેલો છે. પેઈન્ટીંગ, પાવડર પ્રકાર છે વધુ સારી દેખાય છે. ડિઝાઇન વધુ આધુનિક છે, જે આધુનિક ઘરમાં એકીકૃત બંધબેસે છે. મશીન અંદર એલઇડી પ્રકાશ તે એક સુપર સ્ટાર જેમ અંધારિયા રૂમમાં shinning બનાવે છે.



  • ગત:
  • આગામી:

  • તકનિકી વિશિષ્ટતાઓ:
    વર્કિંગ વિસ્તાર: 1500*800mm
    લેસર ટ્યુબ: 80W/100W/130W/150W(with tube extender)
    લેસર ટ્યુબ પ્રકાર: CO2 sealed glass tube.
    ઝેડ ધરી ઊંચાઈ: 200mm adjustable
    આવતો વિજપ્રવાહ: 220V એસી 50 હટર્ઝ / 110V એસી 60Hz
    રેટેડ શક્તિ: 2000W-2500W
    સંચાલન સ્થિતિઓ: Optimized raster,vector and combined mode
    ઠરાવ: 4000DPI
    મેક્સ નકશીકામ ઝડપ: 1000mm / સેકન્ડ
    મેક્સ કટિંગ ઝડપ: 400mm/sec
    ગતિ ગતિ: 2G
    લેસર ઓપ્ટિકલ નિયંત્રણ: 0-100% સોફ્ટવેર દ્વારા સુયોજિત
    ન્યુનત્તમ નકશીકામ માપ: ચિની અક્ષર 2.0mm * 2.0mm, ઇંગલિશ પત્ર 1.0mm * 1.0mm
    સ્થાન આપતા શુદ્ધતા: <= 0.1
    કટીંગ જાડાઈ: 0-20mm(depends on different materials )
    કામ તાપમાન: 0-45 ° સે
    પર્યાવરણીય ભેજ: 5-95%
    બફર મેમરી: 128MB
    સુસંગત સોફ્ટવેર: CorelDraw / / ફોટોશોપ AutoCAD / ભરતકામ તમામ સોફ્ટવેરને પ્રકારના
    સુસંગત ઓપરેશન સિસ્ટમ: Windows XP/2000/Vista,Win7/8//10, Mac OS, Linux
    કમ્પ્યુટર ઈન્ટરફેસ: ઇથરનેટ / USB / વાઇફાઇ
    Worktable: Blade Table
    કુલિંગ સિસ્ટમ: WJ300/5000 Chiller
    હવાનો પંપ: 135W air compressor
    નિર્ગમ પંખો: 550W blower
    મશીન ડાયમેન્શન: 2050mm*1395mm*1025mm
    મશીન નેટ વજન: 540Kg
    મશીન પેકિંગ વજન: 590Kg
  • સંબંધિત વસ્તુઓ