AEON VEGA Series-VEGA15

Кароткае апісанне:

AEON VEGA15 is a commercial standing model laser engraving and cutting machine. The working area is 1500*800mm. For VEGA Series of machine, It mainly designed to satisfied those who want to cut certain thickness of flat materials. The machine engraving speed is not so fast as MIRA machines. Although it can go 1000mm/sec, the acceleration speed is 2G. However, this speed is enough to be outstanding over other similar machines on the market. The VEGA Series does not have up and down working table, the worktable is funnel type with drawer underneath to collect the small pieces cut by the machine.


Падрабязнасці па прадукту

TECHNICAL SPECIFICATIONS

пазнакі тавару

агульны агляд

AEON VEGA15 is a commercial standing model laser engraving and cutting machine. The working area is 1500*800mm. The VEGA Series of a machine, It mainly designed to satisfy those who want to cut certain thicknesses of flat materials. The machine engraving speed is not so fast as MIRA machines. Although it can go 1000mm/sec, the acceleration speed is 2G. However, this speed is enough to be outstanding over other similar machines on the market. The VEGA series does not have an up and down working table, the worktable is funnel type with a drawer underneath to collect the small pieces cut by the machine.
The structure of the machine is very strong, which makes it more steady. The machine equipped with honeycomb and blade worktable and with model3000 or 5000 chillers, makes it possible to install 100W or even 130W laser tube. The air assists system got pressure gauge and regulator to give the users option to add a more powerful compressor to cut thicker materials. The front and back material pass-through door makes it possible to cut long materials.
The machine is also built according to Class I laser standard, with a fully enclosed machine body and key lock on every door and window. The lid adopted tempered glass for fireproof purposes.
Overall, the VEGA15 is a very good commercial standing model of laser engraving and cutting machine. It can fit in larger size materials and could install higher power laser tubes to cut thicker materials. It will be an ideal machine for your business and will bring you profit for sure. And with this model, it a little economical than NOVA14 since it got no up and down working table.

Advantages of the VEGA15

Чыстыя тэхналогіі пакет

One of the biggest enemies of laser engraving and cutting machines is dust. Smoke and dirty particles will slow down the laser machine and make the outcome bad. The Clean pack design of VEGA15 protects the linear guide rail from dust, reduces maintenance frequency effectively, gets a much better outcome.

Клас 1 лазерны Стандартны

The VEGA15 machine case is fully enclosed. There are key locks on every door and window. The main power switch is key lock type, which prevents the machine from those unauthorized persons operating the machine. These features make it much safer.


Хутчэй, чым іншыя

With a Customized stepper motor, high-quality Taiwan Linear Guide rail, and Japanese bearing, the VEGA15 maximum engraving speed is up to 1000mm/sec, acceleration speed is 2G. Faster than other similar machines on the market.


AEON Pro-Smart Software

The Aeon ProSmart software is user-friendly and it has perfect operation functions. You can set parameter details and operate them very easily. It will support all file formats as using on market and can direct work inside of CorelDraw, Illustrator, and AutoCAD.Most Importantly, the software is Mac Os compatible!


Муфтый-Cummunication

The VEGA15 was build with high-speed multi communication system. You can connect to your machine by Wi-Fi, USB cable, LAN network cable and transfer your data by USB Flash disk. Machine has 128 MB memory, LCD screen control panel. With off-line working mode when your electricity down and reboot machine will run on stop position.


Effective Table and front back pass through door

The VEGA got ball screw electric up&down table, steady and precision.Z-Axis height is 200mm, can fit in 200mm height products. The front and back pass through door can fit into the long materials. The funnel worktable with drawer underneath will collect the waste materials or small products very easy and convenient.


Моцны і сучасны корпус

Корпус выраблены з вельмі тоўстага ацынкаванага сталёвага ліста, які з'яўляецца вельмі моцным. Карціна тыпу парашка, выглядае нашмат лепш. Дызайн значна больш сучасным, які выдатна ўпісваецца ў сучасным доме. Святлодыёдным падсвятленне ўнутры машыны робіць яе зіготкай ў цёмным пакоі, як супер зорка.



  • Папярэдні:
  • Далей:

  • Тэхнічныя характарыстыкі:
    Рабочая зона: 1500*800mm
    Лазерная трубка: 80W/100W/130W/150W(with tube extender)
    Тып лазера коркі: CO2 sealed glass tube.
    Вось Z Вышыня: 200mm adjustable
    Уваходнае напружанне: 220V AC 50Hz / 110V AC 60Hz
    Намінальная магутнасць: 2000W-2500W
    Рэжымы працы: Optimized raster,vector and combined mode
    дазвол: 4000DPI
    Максімальная хуткасць гравіроўкі: 1000mm / сек
    Максімальная хуткасць рэзання: 400mm/sec
    Паскарэнне Хуткасць: 2G
    Лазерны аптычны кантроль: 0-100% ўстаноўлена праграмнае забеспячэнне
    Мінімальная Гравіроўка Памер: Кітайскіх іерогліфаў 2.0mm * 2.0mm, англійская Ліст 1.0mm * 1.0mm
    Размяшчэнне Дакладнасць: <= 0,1
    Рэжучая Таўшчыня: 0-20mm(depends on different materials )
    Працоўная тэмпература: 0-45 ° С
    Вільготнасць навакольнага асяроддзя: 5-95%
    Буфер памяці: 128Mb
    Сумяшчальнасць праграмнага забеспячэння: CorelDraw / Photoshop / AutoCAD / Усе віды вышыўкі Праграмнае забеспячэнне
    Сумяшчальнасць Аперацыйная сістэма: Windows XP/2000/Vista,Win7/8//10, Mac OS, Linux
    Кампутарны інтэрфейс: Ethernet / USB / WIFI
    Worktable: Blade Table
    Сістэма астуджэння: WJ300/5000 Chiller
    Паветраны помпа: 135W air compressor
    Выцяжной вентылятар: 550W blower
    Машына Памер: 2050mm*1395mm*1025mm
    Машына Вага нета: 540Kg
    Машына ўпакоўкі Вага: 590Kg
  • Спадарожныя тавары